Metal ФM, KM foundations for street lighting support produced by "METAKO"
Types, dimensions, capacity (carrying capacity) of supports’ foundation are calculated in each
case according to the following parameters: wind load, depth of frost penetration and soil composition; type, size and purpose of the support.
| For support МК, МТ type (ФМ-D-Н) | For support КК type (КМ-D-H) | For support МС, МКС type (КМ-D-H) |
|
|
|
| FM / CM – metal foundation forsupports, D - diameter of pipe, m, H - height of foundation, m | ||
Foundations for high-mast supports produced by “METAKO”
| Variant 1 Mast installation on reinforced concrete foundation (pic. 2) with mounting set (pic. 1). Variant 2 Mast installation on a metal tubular foundation. In this case,the right size pipe with a flange for specific support set in the ground (pic. 5). Variant 3 Mast installation on the tube foundation with a nozzle for specific support (pic. 4). In this case, the desired size pipe is installed, then nozzle with flange is attached on the tube (pic. 3). Variant 4 Mast installation on the reinforced concrete pile drove in ground (pic. 6). |  |  |
| Picture 1. Mounting set for reinforced concrete foundation. | Picture 2. Armoured reinforced concrete foundation |
 |  |  |  |
| Picture 3. Nozzle with flange on the metal foundation | Picture 4. Metal foundation with the nozzle | Picture 5. Metal foundation | Picture 6. Pile foundation |
The depth of the underground part, size and arrangement of foundation are produced according to the project documentation taking into account the geology of soil, climate, region characteristics and type, size and mast’s destination.
DOCUMENTS | PHOTO |